Product catalogue
Find the model and its parameters
Compare LANRUN product families, review each product’s source-backed specifications, and send your operating conditions for an inquiry.
34 products

High-voltage series
KYN61
The KYN61 indoor metal-clad withdrawable switchgear (hereinafter referred to as the switchgear) is a three-phase AC 50Hz indoor complete power distribution unit, used to receive and distribute 40.5kV network power and to control, protect and monitor circuits. Various types of microprocessor-based integrated relay protection devices can be installed on the compartment panels of this product, enabling intelligent system control with remote control, remote measurement, remote signaling and remote adjustment functions, controlling the site network via a bus with communication interfaces. It also provides prevention of incorrect circuit breaker operation, prevention of withdrawing or inserting the handcart under load, prevention of closing the earthing switch while energized, prevention of energizing the earthing switch in the earthed position, and prevention of entering energized compartments, i.e. the "five preventions" functions.
View specifications
High-voltage series
KYN28A
The KYN28A indoor metal-clad withdrawable switchgear (hereinafter referred to as the switchgear) is a three-phase AC 50Hz indoor complete power distribution unit, used to receive and distribute 3.6kV-12kV network power and to control, protect and monitor circuits. Various types of microprocessor-based integrated relay protection devices can be installed on the instrument panel of this product, enabling intelligent system control with remote control, remote measurement, remote signaling and remote adjustment functions, and controlling the on-site network via a bus with communication interfaces. It also provides the "five preventions" functions: prevention of incorrect circuit breaker operation, prevention of withdrawing or inserting the handcart under load, prevention of closing the earthing switch when energized, prevention of energizing with the earthing switch in the earthed position, and prevention of mistakenly entering an energized compartment.
View specifications
High-voltage series
HXGN-12
HXGN fixed-type AC metal-enclosed switchgear. The HXGN□-12 series AC metal ring-main switchgear uses an SF6 load-break switch as the main switch, with the entire enclosure air-insulated. It is a compact, extensible metal-enclosed ring-main switchgear suitable for distribution automation. It features simple structure, flexible operation, reliable interlocking and easy installation. It provides corresponding technical solutions for various applications and user requirements. The load-break switch and circuit breaker can be operated manually or electrically; with optional electric operating mechanisms and communication devices, distribution automation functions can be achieved.
View specifications
High-voltage series
YB Series Box-Type Substation
Box-type substation, also called prefabricated substation or prefabricated transformer station. It is a factory-prefabricated indoor/outdoor compact distribution device in which high-voltage switchgear, distribution transformers and low-voltage distribution equipment are arranged as a unit according to a certain wiring scheme; that is, the functions of transformer step-down and low-voltage distribution are organically combined and installed in a moisture-proof, rust-proof, dust-proof, rat-proof, fire-proof, theft-proof, heat-insulating, fully enclosed, movable steel structure enclosure. It is particularly suitable for urban network construction and renovation, and is a new type of substation that has emerged after civil-construction substations. Box-type substations are suitable for mines, factories and enterprises, urban public buildings, residential areas, expressways, oil and gas fields and wind power stations. They replace the original civil-construction distribution rooms and distribution stations, becoming a new type of complete power distribution device.
View specifications
High-voltage series
DFW Series High-Voltage Cable Branch Box
The DFW series high-voltage cable branch boxes are widely used for node connections in 10 kV cable systems and are the main electrical equipment for collecting and branching cables after they leave the switchgear. The cable joints in the branch box use imported rubber with high-grade insulation tightly wrapped over the insulation, with no exposed live parts; the switches in branch boxes with switches are all SF6-insulated load switches. The DFW branch box is designed for outdoor maintenance-free operation and is safe and reliable, with a protection rating of IP33 to IP66; underground branch joints can withstand flood immersion. This product is widely used in distribution networks in urban industrial areas, residential areas, commercial centers, mining areas and large enterprises such as steel, automotive, petroleum, chemical, cement and others, and is particularly suitable for urban grid renovation projects, greatly saving investment in electrical equipment and cables and improving power supply reliability. This product complies with the following standards: GB/T 3906-2020 "3.6 kV~40.5 kV AC metal-enclosed switchgear and controlgear"; GB/T 3804-2017 "3.6 kV~40.5 kV high-voltage AC load switches".
View specifications
Low-voltage series
Schneider Blokset
The Blokset series switchgear (referred to as B-cabinet) was designed by Schneider specifically for its low-voltage power distribution products and is a high-end cabinet type introduced by our company from Schneider. It is currently among the more advanced low-voltage draw-out switchgear in China. The product consists of standardized, series-based modules, and the drawers have reliable mechanical interlocks, making operation safer and more reliable for users. This switchgear is suitable for three-phase five-wire power supply systems with AC 50 (60) Hz, rated voltage 400 V and 660 V, and rated current up to 4000 A. It can be used in power plants, substations, industrial and mining enterprises, and civil building infrastructure, among other fields, for the control of power generation, transmission and distribution, power conversion, and power consumption equipment. This series of switchgear complies with the following national standards: GB 7251.1 Low-voltage switchgear and controlgear assemblies - Part 1: General rules; GB/T 7251.12 Low-voltage switchgear and controlgear assemblies - Part 2: Assembly for power distribution and control; IEC 61439 Low-voltage switchgear and controlgear assemblies.
View specifications
Low-voltage series
MNS
The MNS low-voltage withdrawable switchgear (hereinafter referred to as switchgear) was developed by our company with reference to ABB's MNS cabinet type and comprehensive improvements, and is a relatively advanced low-voltage withdrawable switchgear in China. The product consists of standardized, series-based modules, and the drawers have reliable mechanical interlocking devices, making use safer and more reliable for users. This switchgear is suitable for AC 50(60)Hz, rated voltage 400V, 660V, rated current 6300A and below three-phase five-wire power supply systems, and can be used in power plants, substations, industrial and mining enterprises, buildings and hotels, airports, docks, and radio and television communication centers as control for power generation, transmission and distribution, power conversion and power consumption equipment, and performs reactive power compensation on its main busbar through capacitor compensation cabinets. This series of switchgear complies with national standards: GB/T7251.1 "Low-voltage switchgear and controlgear assemblies - Part 1: General rules", GB/T7251.12 "Low-voltage switchgear and controlgear assemblies - Part 2: Assemblies for power distribution and control", IEC61439 "Low-voltage switchgear and controlgear assemblies".
View specifications
Low-voltage series
GGD
The GGD AC low-voltage distribution cabinet is suitable for AC 50Hz distribution systems with a rated operating voltage of 400V and a rated operating current up to 6300A in power plants, substations, industrial and mining enterprises and other power users, for the conversion, distribution and control of electrical energy for power, lighting and distribution equipment. The GGD AC low-voltage distribution cabinet is a new type of low-voltage distribution cabinet designed in accordance with the requirements of the competent authorities of the Ministry of Energy, power users and design departments, and on the principles of safety, economy, rationality and reliability. The product features high breaking capacity, good dynamic and thermal stability, flexible electrical schemes, convenient combination, series design, strong practicality, novel structure and a high degree of protection. It can be used as a replacement product for low-voltage switchgear assemblies. The GDD low-voltage distribution cabinet complies with the following standards: IEC61439 Low-voltage switchgear and controlgear assemblies; GB/T7251.12-2013 Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies, and other standards.
View specifications
Low-voltage series
GCS
The GCS low-voltage withdrawable switchgear (hereinafter referred to as switchgear) is widely selected by power users. The drawer units of the GCS low-voltage withdrawable switchgear are provided with a complete mechanical interlock device to ensure the personal safety of operators; the MCC cabinet can have up to 22 circuits in a single cabinet, fully considering the needs of automated electric door (machine) groups in large single-unit capacity power plants, petrochemical systems and other industries; the connection between the device and external cables is completed in the cable compartment, and cables can enter and exit from the top or bottom. The zero-sequence current transformer is placed in the cable compartment, making installation and maintenance convenient; the drawer units have a sufficient number of secondary connectors to meet the requirements for the number of contact points for computer interfaces and automatic control circuits. The device is suitable for power distribution systems in power plants, petroleum, chemical, metallurgy, textile, high-rise building and other industries. In large power plants, petrochemical systems and other places with a high degree of automation and requiring computer interfaces, it is used as low-voltage complete power distribution equipment for power distribution, centralized motor control and reactive power compensation in power generation and supply systems with three-phase AC frequency of 50 (60) Hz, rated operating voltage of 380V (400), (600), and rated current below 4000A. This series of switchgear complies with national standards: GB/T 7251.12 "Low-voltage switchgear and controlgear assemblies - Part 2: Assemblies for power distribution and control" and IEC61439 "Low-voltage switchgear and controlgear assemblies".
View specifications
Low-voltage series
GDF
The GDF AC low-voltage fixed-partition switchgear is a new type of switchgear developed in response to market (State Grid Corporation) requirements, drawing on the advantages of MNS and GCS low-voltage switchgear assemblies at home and abroad and adopting high-performance withdrawable or plug-in air circuit breakers, offering safety, reliability and ease of maintenance. This series adopts an independent modular structure design and consists of a horizontal busbar compartment, a vertical busbar compartment, a functional unit compartment and a cable compartment. The compartments are separated and sealed from one another by steel plates or insulating plates, which effectively prevents faults from affecting one another. It is a new product option for AC power distribution systems in power plants, substations, factories and mines. This series complies with the following standards: GB/T 7251.12 "Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies"; IEC 60439 "Low-voltage switchgear and controlgear assemblies".
View specifications
Low-voltage series
GGJ
Most loads in power systems are inductive, and the widespread use of power electronic equipment by electricity-consuming enterprises generally results in a low grid power factor. A low power factor reduces equipment utilization, increases power supply investment, impairs voltage quality, shortens equipment service life and greatly increases line losses. Therefore, connecting capacitor compensation cabinets in the power system can balance inductive loads and improve the power factor, thereby enhancing equipment utilization. To address the energy waste caused by a low grid power factor and these unfavorable factors for power supply production, the grid power factor must be effectively improved, i.e. reactive power compensation equipment and devices must be added. It is suitable for light textile, metallurgical, chemical, mining, machinery and other factories and mining enterprises, serving for power and lighting distribution in low-voltage distribution systems of 50Hz AC, rated voltage 380V or 660V, rated current up to 630A, three-phase three-wire, four-wire or five-wire systems. The GGJ reactive power compensation cabinet complies with the following standard: GB/T 15576 Low-voltage成套无功功率补偿装置 (Low-voltage成套 reactive power compensation assemblies).
View specifications
Low-voltage series
XL Series Power Distribution Cabinet
The XL series low-voltage power distribution cabinet is suitable for power and lighting distribution in three-phase four-wire power systems with an AC frequency of 50 Hz and a voltage of 400 V and below in industrial and civil buildings. It is also suitable for making various motor starting cabinets, including full-voltage direct-on-line starting cabinets, all-digital control soft starter cabinets, autotransformer reduced-voltage starting cabinets, star-delta starting cabinets, multi-speed motor starting cabinets, etc. Dozens of primary circuit scheme numbers or derived scheme numbers are available for selection, giving a wide range of applications. This product is an indoor enclosed distribution box. The enclosure is bent and welded from thin steel plate; the front has a single left-opening door fitted with measuring instruments such as a voltmeter and ammeter, and with operating and signal devices. It is a power distribution device with a simple structure, reliable operation and relatively low cost. The XL series products comply with the following standards: IEC 61439 Low-voltage switchgear and controlgear assemblies; GB/T 7251.12 Low-voltage switchgear and controlgear assemblies Part 2: Assemblies for power distribution and control.
View specifications
Low-voltage series
PLC/DCS System Cabinet
PLC and DCS system cabinets feature compact structure, stable operation and complete functions. They can be combined according to the actual scale of control, enabling either single-cabinet automatic control or multi-cabinet distributed (DCS) control systems via industrial Ethernet or industrial fieldbus networks. PLC control cabinets suit industrial automation control applications of various scales. They are widely used in power, metallurgy, chemical, papermaking, environmental protection and wastewater treatment industries.
View specifications
Low-voltage series
ATS
Abbreviation for ATS automatic transfer switch. ATS is mainly used in emergency power supply systems: a switching device that automatically transfers the load circuit from one power source to another (backup) power source, to ensure continuous and reliable operation of important loads. Under heavy load conditions, the transfer time is relatively long, over 100 ms, which will cause load power interruption; it is only suitable for ordinary lighting and ordinary motor loads. The ATS dual-power cabinet complies with the following standard: GB/T 7251.12 "Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies".
View specifications
Low-voltage series
JP Cabinet
The JP integrated distribution box is a new type of integrated control box combining power distribution, metering, protection, control and reactive power compensation. It is used in substations, factories, industrial and mining enterprises, large power plants, petroleum and chemical enterprises, large steel mills, high-rise building power centers, reactive power compensation, metering, power distribution and other applications. The JP low-voltage integrated distribution box conforms to the following standards: IEC 439-1 Low-voltage switchgear and controlgear assemblies; GB 7251.12 Low-voltage switchgear and controlgear assemblies - Part 2: Assemblies for power distribution and control; GB/T 15576 Low-voltage reactive power compensation assemblies.
View specifications
Low-voltage series
DFX Series
Cable branch boxes are used only for cable branching. Their main function is to split or transfer cables, primarily performing cable splitting and cable transfer functions. With the development of cable-based distribution networks, when independent loads of modest capacity are relatively concentrated, cable branch boxes can be used for multi-branch cable connections, because the branch box allows direct operation of each circuit. 1. Cable splitting function. On a relatively long line, multiple small-cross-section cables often result in wasted cable, so in outgoing circuits to loads, a large main cable is often used for the outgoing run, and then near the load a cable branch box is used to split the main cable into several small-cross-section cables, which connect to the loads. This wiring method is widely used in urban grids for street lighting and small-user supply. 2. Cable transfer function. On a relatively long line, where cable length cannot meet the line requirement, cable joints or cable transfer boxes must be used. Usually cable intermediate joints are used for short distances, but for longer lines, based on experience on cable lines above 1000 m, if there are multiple intermediate joints in the cable, cable branch boxes will be considered for transfer to ensure safety. The DFX low-voltage cable branch box conforms to standards such as IEC61439 Low-voltage switchgear and controlgear assemblies and GB/T7251.5-2017 Low-voltage switchgear and controlgear assemblies Part 2: Assemblies for power distribution and control.
View specifications
Low-voltage series
Explosion-proof BXK Series
Explosion-proof distribution boxes are a type of distribution box with explosion-proof performance. Main types include explosion-proof control distribution boxes, explosion-proof lighting distribution boxes, explosion-proof power distribution boxes, and explosion-proof corrosion-resistant distribution boxes. BXK explosion-proof distribution boxes are suitable for wiring in flammable and explosive locations such as petrochemical plants, oil platforms, chemical, pharmaceutical, coal, smelting, shipbuilding, military, and textile facilities. Zone 1 and Zone 2 explosive gas atmospheres. Zone 20, 21, and 22 combustible dust atmospheres. BXK explosion-proof distribution boxes comply with GB3836.1 "Explosive atmospheres - Part 1: Equipment - General requirements" and GB3836.2 "Explosive atmospheres - Part 2: Equipment protected by flameproof enclosures 'd'" and other standards.
View specifications
Low-voltage series
JXF Series
The JXF features small size, easy installation, special technical performance, fixed position, unique configuration functions, no site restrictions, relatively widespread application, stable and reliable operation, high space utilization, small footprint and environmental friendliness. It is the control center for the rational distribution of electrical energy among the various components in the power supply line, the control link for reliably receiving the upstream power supply and correctly feeding out load power, and the key to whether users are satisfied with power supply quality. Improving the operational reliability of the distribution box is the goal of creating high-quality projects. Purpose of the distribution box: rational distribution of electrical energy and convenient making and breaking of circuits. It has a relatively high degree of safety protection and can visually display the conduction state of the circuit. The JXF distribution box complies with the following standards: IEC61439 Low-voltage switchgear and controlgear assemblies; GB/T7251.3-2017 Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO); and other standards.
View specifications
Low-voltage series
PZ30
The PZ30 series surface-mounted distribution boxes feature small size, easy installation, fixed position, unique configuration functions, no site restrictions, wide application, stable and reliable operation, high space utilization, small footprint and environmental friendliness. They are the control center for rationally distributing electrical energy among the various components in the power supply circuit, the control link for reliably receiving the upstream power supply and correctly feeding out load power, and the key to whether users are satisfied with power supply quality. Improving the operational reliability of power distribution boxes is the goal of creating high-quality projects. Purpose of the distribution box: rational distribution of electrical energy and convenient switching operations on circuits. It has a high degree of safety protection and can visually display the conduction status of the circuit. The PZ30 distribution box complies with the following standards: IEC 61439 Low-voltage switchgear and controlgear assemblies, GB/T 7251.3 Low-voltage switchgear and controlgear assemblies Part 3: Distribution boards intended to be operated by ordinary persons (DBO), and other standards.
View specifications
Instrumentation / Level
26GHz High-Frequency Radar Level Instrument
The LDRD60XX series sensors are 26G high-frequency radar level measuring instruments with a maximum measuring distance of up to 80 meters. The antenna has been further optimized, and the new high-speed microprocessor enables higher-rate signal analysis and processing, allowing the instrument to be used in: highly complex measurement conditions such as reactors or solid silos. The radar level antenna emits narrow microwave pulses that are transmitted downward through the antenna. When the microwaves contact the surface of the measured medium, they are reflected back, received again by the antenna system, and transmitted to the electronic circuit section for automatic conversion into a level signal (because microwaves propagate extremely fast, the round-trip time for the electromagnetic wave to reach the target and return to the receiver after reflection is almost instantaneous). Note: When using the radar level gauge, make sure the highest material level does not enter the measurement blind zone (the area shown as D in the figure).
View specifications
Instrumentation / Level
Guided Wave Radar Level Meter
The guided wave radar level meter is a radar level meter based on the time-domain reflectometry (TDR) principle. The high-frequency microwave pulses emitted by the guided wave radar propagate along the probe (steel cable or steel rod); upon reaching the measured medium, a sudden change in dielectric constant causes reflection, and part of the pulse energy is reflected back. The time interval between the emitted pulse and the reflected pulse is proportional to the distance to the measured medium. Owing to the use of an advanced microprocessor and the distinctive choDiscovery echo processing technology, the guided wave radar level meter can be applied under various complex operating conditions. Multiple process connection methods and probe types make the HBRD70X series guided wave radar level meters suitable for various complex operating conditions and applications, such as high temperature, high pressure and media with low dielectric constant. Using a pulsed operating mode, the guided wave radar level meter has extremely low emission power and can be installed in various metal and non-metal vessels; it is harmless to people and the environment. H----measuring range, L----empty tank distance, B----top blind zone, E----minimum distance from probe to tank wall. *Note: Reliable measurement of the level in the tank can be ensured only when the material is between the top blind zone and the bottom blind zone.
View specifications
Instrumentation / Temperature
Thermocouple
Two conductors of different composition (called thermocouple wires or thermoelectrodes) are joined at both ends to form a circuit. When the temperatures of the two junctions differ, an electromotive force is generated in the circuit; this phenomenon is called the thermoelectric effect, and this electromotive force is called thermoelectric potential. Thermocouples use this principle for temperature measurement, where the end directly used to measure the medium temperature is called the working end (also called the measuring end), and the other end is called the cold end (also called the compensating end); the cold end is connected to a display instrument or matching instrument, and the display instrument indicates the thermoelectric potential generated by the thermocouple. Common thermocouples can be divided into two major categories: standard thermocouples and non-standard thermocouples. Standard thermocouples are those for which the national standard specifies the relationship between thermoelectric potential and temperature, permissible error, and a unified standard graduation table, and matching display instruments are available for selection. Non-standard thermocouples are inferior to standard thermocouples in scope of use or order of magnitude, generally have no unified graduation table, and are mainly used for measurement in certain special occasions. Our company's thermocouples and thermal resistors are all produced according to IEC international standards, and the seven standard thermocouples/resistances S, B, E, K, R, J, and T can be specified for customization.
View specifications
Instrumentation / Level
120 GHz Radar Level Gauge
The LDRD-6120GX produced by our company operates at 120 GHz, which has electromagnetic characteristics in the terahertz band. This gives it characteristics not found in other radar measurement products, such as the ability to penetrate non-polar materials (ray-like properties). In industrial environments with strong adhesion and heavy dust, it offers highly desirable measurement stability and resistance to environmental interference, and requires no purge device. Because it also has a very small antenna beam angle and a strong adaptive automatic gain function, in most cases no aiming device is needed. This makes installation requirements simple and economical in on-site use, and commissioning is quick. The 120G frequency-modulated continuous-wave radar uses a 10 GHz sweep bandwidth, with fast Fourier transform calculation implemented in FPGA chip hardware. Our engineering and technical personnel creatively applied diffracted wave separation and spectrum refinement algorithm implementation technology, enabling measurement accuracy within 50 meters to reach 0.217 mm (theoretical value), and a range resolution of 8 mm for a stationary vertical reflective surface. This product requires only 80 ms to complete a full measurement calculation over a 100 m range.
View specifications
Instrumentation / Temperature
Resistance Temperature Detector
This Pt100 platinum resistance temperature detector uses a high-purity platinum wire as the temperature-sensing element, conforms to IEC60751, has a nominal resistance of 100Ω at 0°C, and a temperature measurement range of -200~500°C. Class A and Class B accuracy are available. It is equipped with a 304 stainless steel protective sleeve, resistant to corrosion and robust in structure. It collects temperature using the characteristic of platinum resistance changing with temperature, with high measurement accuracy, good repeatability and strong stability. It supports two-wire/three-wire/four-wire connection and is compatible with various temperature control instruments. It is widely used for low- and medium-temperature precision temperature measurement in food, pharmaceutical, HVAC and chemical equipment. Protective tube length, threads and flange specifications can be customized. Customization is supported, and supply is stable.
View specifications
Instrumentation / Level
Magnetic flap level gauge
This magnetic flap level gauge works on the magnetic coupling principle and consists of a main body tube, a float and a magnetic flap indicator panel. Its structure is simple and intuitive, and it provides direct on-site level reading without a power supply. Optional level switches and a 4-20 mA remote transmission transmitter can upload the level signal to a control system. The main body tube is made of 304 stainless steel, resistant to temperature and pressure, and suitable for water, oil and weakly corrosive liquid media. The flaps are red and white: as the level rises the red flaps turn over, and as it falls the white flaps reset, giving clear reading. It can be side-mounted, top-mounted or bottom-mounted, supports flange connection, and an explosion-proof version is optional. It is widely used for level monitoring of storage tanks, reactors, water tanks and other equipment. Custom lengths and materials are supported, customization is available, and supply is stable.
View specifications
Instrumentation / Flow
Electromagnetic Flowmeter
This intelligent electromagnetic flowmeter operates on Faraday's law of electromagnetic induction and measures the volumetric flow of conductive liquids. It has no internal moving parts and no pressure loss, uses low-frequency square-wave excitation, and offers stable measurement with accuracy of ±0.5% FS. It supports integral or split-type construction with an LCD backlight display showing instantaneous flow, cumulative flow and flow velocity; outputs include 4-20 mA and pulse signals, with optional RS485 Modbus and HART communication. The measuring tube is 304 stainless steel; lining options include rubber, PTFE and PFA; electrodes are 316L stainless steel as standard, with optional Hastelloy, titanium and tantalum electrodes. It features empty-pipe detection and fault self-diagnostics, with protection rating IP65. It is widely used for flow measurement of wastewater, tap water, chemical slurries and conductive acid/alkali media. Flange and clamp connections are supported, customization is available, and supply is stable.
View specifications
Instrumentation
Intelligent Display Instrument
The earliest smart meters were known as automatic meter reading (AMR) systems, and remote automatic meter reading became the most basic function of smart meters. Using communication functions such as infrared on smart meters enables automatic meter reading. This eliminates the need for staff to go on site for manual meter reading, improving efficiency and reducing the cost of meter reading operations. In addition, it reduces errors caused by human factors, improves meter reading accuracy and increases revenue. Later, bidirectional communication remote operation functions were added to prevent illegal use of electricity/gas, etc., so smart meters were initially applied and favored by the energy industry. Our company's intelligent display instruments have been used throughout China since the 1990s. Our intelligent display instruments have obtained multiple invention patents, and since the beginning of this century have been exported overseas, serving major Fortune Global 500 enterprises. Both product quality and our service reputation are evident to all.
View specifications
Instrumentation / Pressure
Pressure Gauge
The selection of instrument type must meet the requirements of the process production. For example, whether remote transmission, automatic recording or alarm is required; whether the properties of the measured medium (such as the temperature, viscosity, corrosiveness, degree of contamination, flammability and explosiveness of the measured medium, etc.) impose special requirements on the instrument; and the requirements of on-site environmental conditions (such as humidity, temperature, magnetic field strength, vibration, etc.) on the instrument type. Therefore, correctly selecting the instrument type according to process requirements is an important prerequisite for ensuring normal instrument operation and safe production. For example, the Bourdon tube of an ordinary pressure gauge is mostly made of copper alloy (alloy steel for high pressure), while the Bourdon tube of an ammonia pressure gauge is made of carbon steel (or stainless steel), and copper alloy is not permitted. Because ammonia reacts chemically with copper and may cause an explosion, an ordinary pressure gauge cannot be used for ammonia pressure measurement. An oxygen pressure gauge and an ordinary pressure gauge may be completely identical in structure and materials, except that an oxygen pressure gauge must be oil-free. Because oil entering an oxygen system can easily cause an explosion. The oxygen pressure gauge used cannot use oil as the working medium during calibration like an ordinary pressure gauge, and the oxygen pressure gauge must be strictly kept from contact with oil contamination during storage. If an existing pressure gauge with oil contamination must be used to measure oxygen pressure, it must be repeatedly cleaned with carbon tetrachloride before use and carefully inspected until it is free of oil contamination.
View specifications
Instrumentation / Pressure
Pressure Transmitter
This pressure transmitter uses a diffused silicon or monocrystalline silicon sensing core and can measure gauge pressure and absolute pressure of gas and liquid media. Range is selectable, accuracy is 0.075% FS, powered by two-wire 24VDC, with standard 4-20mA output and optional RS485/Modbus and HART protocols. The diaphragm and housing are made of 304 stainless steel, with temperature compensation, overload resistance and vibration resistance, protection rating IP65, stable signal and strong anti-interference for long-distance transmission. Widely used for pressure monitoring in water supply, oil and gas, chemical, HVAC and hydraulic equipment, and used with PLC and DCS systems. Custom pressure ports, ranges and display heads are supported; customization is supported, with stable supply and reliable quality
View specifications
Instrumentation / Temperature
Type K Thermocouple
The thermocouple is a temperature sensing element, using nickel-chromium/nickel-silicon (Type K), conforming to IEC60584, with a temperature range of 0 to 1300°C, accuracy class II, stainless steel protection tube, capable of outputting a thermoelectric potential signal, used for medium temperature acquisition, and paired with temperature control devices for temperature monitoring and control
View specifications
Instrumentation / Temperature
Platinum-Rhodium Thermocouple
This S-type platinum-rhodium thermocouple is a platinum-rhodium 10 - platinum noble metal temperature sensing element, compliant with IEC60584. Long-term temperature measurement range 0–1300°C, short-term maximum up to 1600°C. Accuracy class I/II selectable. Equipped with a corundum protective tube, resistant to high temperature and oxidation, suitable for oxidizing and inert atmospheres. The product offers stable thermoelectric potential and high measurement accuracy; paired with high-temperature instruments for signal acquisition, it is widely used in ceramic kilns, glass furnaces, heat treatment furnaces, and metallurgical high-temperature measurement scenarios. Customizable protective tube length, threads, and flange structures; customizable, stable supply.
View specifications
Instrumentation / Level
Radar Level Gauge
This high-frequency radar level gauge uses high-frequency microwave pulse technology for non-contact measurement. It is not affected by medium temperature, pressure, foam or dust, offers high measurement accuracy, is wear-free and requires little maintenance. It is equipped with an LCD backlit display showing level, ullage and volume; supports 4-20mA and pulse output, with optional RS485 Modbus and HART protocols. Antenna options include horn, rod and parabolic types; the housing is aluminum alloy; flanges are available in 304/316L stainless steel; protection rating IP67; explosion-proof versions available. Suitable for storage tanks, silos, reactors, wastewater tanks and similar applications, and can measure liquids, slurries and granular materials. Custom measuring ranges and antenna types available; customizable and stable supply.
View specifications
Low-voltage series
Distribution box
This outdoor waterproof distribution box uses a one-piece formed enclosure process, with a sturdy structure and excellent protective performance. It is used for line distribution and overload and short-circuit protection, and can house electrical components such as circuit breakers, contactors and terminals. The door is fitted with a sealing gasket and latch, making it waterproof and dustproof and resistant to corrosion; the enclosure has reserved cable entry and exit holes for convenient wiring and supports wall mounting. It is widely used for power distribution and control in construction sites, photovoltaic systems, water supply, municipal works, buildings and outdoor equipment. Internal layout, dimensions and door opening method can be customized as required; customization is supported and supply is stable.
View specifications- LR3351
Instrumentation / Pressure
LR3351 Single-Crystal Silicon Smart Transmitter
The source manual describes a digital smart pressure/differential-pressure transmitter using single-crystal silicon sensing technology. The digital indicator can display pressure, current and a 0–100% scale. Source: LR3351 Chinese manual, pages 1 and 3.
View specifications
