Skip to content
LANRUN
120 GHz Radar Level Gauge product image 1
120 GHz Radar Level Gauge product image 1
120 GHz Radar Level Gauge product image 2
120 GHz Radar Level Gauge product image 3
120 GHz Radar Level Gauge product image 4

Instrumentation

120 GHz Radar Level Gauge

The LDRD-6120GX produced by our company operates at 120 GHz, which has electromagnetic characteristics in the terahertz band. This gives it characteristics not found in other radar measurement products, such as the ability to penetrate non-polar materials (ray-like properties). In industrial environments with strong adhesion and heavy dust, it offers highly desirable measurement stability and resistance to environmental interference, and requires no purge device. Because it also has a very small antenna beam angle and a strong adaptive automatic gain function, in most cases no aiming device is needed. This makes installation requirements simple and economical in on-site use, and commissioning is quick. The 120G frequency-modulated continuous-wave radar uses a 10 GHz sweep bandwidth, with fast Fourier transform calculation implemented in FPGA chip hardware. Our engineering and technical personnel creatively applied diffracted wave separation and spectrum refinement algorithm implementation technology, enabling measurement accuracy within 50 meters to reach 0.217 mm (theoretical value), and a range resolution of 8 mm for a stationary vertical reflective surface. This product requires only 80 ms to complete a full measurement calculation over a 100 m range.

Request a quote

Please provide your operating conditions, quantity and required connection or output.

Technical details

Specifications from source material

The LDRD-6120GX produced by our company operates at 120 GHz, which has electromagnetic characteristics in the terahertz band. This gives it characteristics not found in other radar measurement products, such as the ability to penetrate non-polar materials (ray-like properties). In industrial environments with strong adhesion and heavy dust, it offers highly desirable measurement stability and resistance to environmental interference, and requires no purge device. Because it also has a very small antenna beam angle and a strong adaptive automatic gain function, in most cases no aiming device is needed. This makes installation requirements simple and economical in on-site use, and commissioning is quick. The 120G frequency-modulated continuous-wave radar uses a 10 GHz sweep bandwidth, with fast Fourier transform calculation implemented in FPGA chip hardware. Our engineering and technical personnel creatively applied diffracted wave separation and spectrum refinement algorithm implementation technology, enabling measurement accuracy within 50 meters to reach 0.217 mm (theoretical value), and a range resolution of 8 mm for a stationary vertical reflective surface. This product requires only 80 ms to complete a full measurement calculation over a 100 m range.

Measuring medium
steam, mist, foam, waves, stirring, floating objects, dust, granules, powder
Measuring temperature
-40 to 200 °C
Measuring pressure
-0.1 to 32 MPa
Protection class
IP67
Power supply
two-wire (DC24V) / four-wire (DC24V / AC220V)
Signal output
4...20mA / HART (two-wire / four-wire), RS485 / Modbus. *Note: For details of the above data, refer to the catalog

Full product details

Overview

The LDRD-6120GX produced by our company operates at 120 GHz, which has electromagnetic characteristics in the terahertz band. This gives it characteristics not found in other radar measurement products, such as the ability to penetrate non-polar materials (ray-like properties). In industrial environments with strong adhesion and heavy dust, it offers highly desirable measurement stability and resistance to environmental interference, and requires no purge device. Because it also has a very small antenna beam angle and a strong adaptive automatic gain function, in most cases no aiming device is needed. This makes installation requirements simple and economical in on-site use, and commissioning is quick. The 120G frequency-modulated continuous-wave radar uses a 10 GHz sweep bandwidth, with fast Fourier transform calculation implemented in FPGA chip hardware. Our engineering and technical personnel creatively applied diffracted wave separation and spectrum refinement algorithm implementation technology, enabling measurement accuracy within 50 meters to reach 0.217 mm (theoretical value), and a range resolution of 8 mm for a stationary vertical reflective surface. This product requires only 80 ms to complete a full measurement calculation over a 100 m range.

Operating Environment

Measuring medium: steam, mist, foam, waves, stirring, floating objects, dust, granules, powder. Measuring temperature: -40 to 200 °C. Measuring pressure: -0.1 to 32 MPa. Protection class: IP67. Power supply: two-wire (DC24V) / four-wire (DC24V / AC220V). Signal output: 4...20mA / HART (two-wire / four-wire), RS485 / Modbus. *Note: For details of the above data, refer to the catalog.

Technical Parameters

Measuring range 0.05-150 m. Process connection M56x2 thread / flange. Accuracy ±0.7 mm. Frequency range 120 GHz. Explosion-proof rating Exia IIC T6 Ga / Exd IIC T6 Gb. Housing aluminum single chamber / aluminum dual chamber / plastic / stainless steel single chamber.

Dimensions

Length Custom. Width Custom. Height Custom.

Product Features

1. No blind zone, high accuracy. 2. Not affected by pressure changes, vacuum, temperature changes, inert gas, smoke, steam and other environmental factors. 3. Simple installation, sturdy and durable, maintenance-free. 4. HART or PROFIBUS-PA communication protocol and Foundation Fieldbus protocol; simple calibration, easy on-site calibration via digital liquid crystal display, simple configuration setup and programming via GDPF software. 5. Sensitive measurement, fast refresh rate. 6. Suitable for high-temperature conditions (up to 230 °C).

Related products